Analog Communications Lab
This lab is a part of II Year II semester. The main objective of this lab is to gain the practical hands on experience by exposing the students to various ANALOG modulation and demodulations techniques. The students will have and understanding of the concepts involved in transmission and reception of the signals in communication.
It deals with the designing all types of analog Modulation and Demodulation techniques in simulator with the help of MATLAB. The Lab is well equipped with all the required Trainer Kits on which students can perform their experiments and test the different techniques available presently. The student projects and research work is supported in this Lab.
Equipment Names:
- 5kva servo stabilizer
- Cathode ray oscilloscope(digital)
- Function generators
- Amplitude Modulation & Demodulation kit
- Diode Detector Charactertics kit
- Frequency Modulation & Demodulation kit
- Balance Modulation & Demodulation kit
- Pre-Emphasis& De-emphasis kit
- Charcteristics of Mixer kit
- Digital Phase Detector kit
- Phase Locked Loop kit
- Synchornous detector kit
- SSB System kit
- Squelech Circuit kit
- Agc charcteristics
Digital Communications Lab
This lab is a part of III Year I semester .The main objective of this lab is to gain the practical hands on experience by exposing the students to various DIGITAL modulation and demodulations techniques. The students will have an understanding of the concepts involved in transmission and reception of the signals in communication.
The Lab is well equipped with all the required Trainer Kits on which students can perform their experiments and test the different techniques available presently.
Equipment Names:
- Analog Sampling &Reconstruction Trainer
- PAM Modulation& Demodulation Trainer
- Time Devision Multiplexing
- PSK Modulation& Demodulation Trainer
- DPSK Modulation& Demodulation Trainer
- FSK Modulation& Demodulation Trainer
- PCM Modulation& Demodulation Trainer.
- DPCM Modulation& Demodulation Trainer
- Delta Modulation& Demodulation Trainer
- ASK Modulation& Demodulation Trainer
- CATHODE RAY OSCILLOSCOPE(Analog)
- CATHODE RAY OSCILLOSCOPE(Digital)
- Companding Trainer Kit
- Linear Block Code Encoder&Decoder Trainer Kit
- Binary Cyclic Code Encoder&Decoder Trainer Kit
- Convolution Code Encoder&Decoder Trainer Kit
Digital Signal Processing Lab
This lab is part of IV year I semester. The main aim of the lab is to gain the practical hands on experience by exposing the students to various signals & systems concepts in MATLAB and gives an idea how to generate various signals & verify the properties of signals & systems live linearity, stability, time invariance, conclusions, corrections etc. This also equipped with DSP processors TMS320C67XX, TMS320C54XX and Code composer studio simulator.
This lab is also used to finding the transforms of signals, location of poles & zeros on Z-plane & S-plane & extraction of signals masked by noise. The student projects and research work is supported in this Lab.
Equipment Names:
- Intel P4 3.6 processor 80 Gb Hard Disk 512 Mb RAM ASUS Mother Board Keyboard Mouse 15” CRT Monitor Intel P4 1.8(Dual core) processor 80 Gb Hard Disk 512 Mb RAM
- MSI Mother Board Keyboard Mouse 15” CRT Monitor Intel P4 1.8(Dual core) processor 80 Gb Hard Disk 512 Mb RAM
- MSI Mother Board Keyboard Mouse 15” CRT Monitor Intel Dual core processor 160 Gb Hard Disk 1 Gb RAM
- ASUS new Mother Board Keyboard Mouse 15” CRT Monitor UPS-7.5 KVA ONLINE(180VDC)
- 12v-28h(15-batteries) SMF BATTERIES BATTERY RACK
- CODE COMPOSER STUDIO 3.1 VERSION
- TMS320C6713-DSP STRATER KIT
- TMS320C5416-DSP STRATER KIT
- MATLAB (Ver. 8.0) Software
Electronic Circuits & PDC Lab
This is combination of two different domains, those are EC & PDC. This lab is a part of II Year II semester. EC lab deals both the Hardware and Software part. This lab focuses on the working of power amplifiers, Voltage Regulators and their applications and they are simulated using PSPICE Software. The various power amplifiers include CLASS A, B, C and Push pull configurations.
PDC lab deals with Pulse shaping, Multivibrators, Oscillators, Switching Circuits…etc. The Lab is well equipped with the required Trainer Kits over which students perform experiments. Students are also guided in performing the MINI projects.
Equipment Names:
- Two stage rc coupled amplifier
- Current shunt feedback amplifier
- Class a power amplifier
- Complementry class b amplifier
- Class c tuned amplifier
- Series voltage regulator
- Shunt voltage regulator
- Wein bridge oscillator
- RC phase shift oscillator.
Electronic Computer-Aided Design Lab
This lab is a part of III Year II semester and it is provided with Xilinx ISE.to implement digital ICs using VHDL language. The lab isalso equipped with Xilinx ISE, CPLD and FPGA Kits used for implementation of VHDL code. This lab is equipped with 36 systems with Xilinx Simulator.
The student projects and research work is supported in this Lab
Equipment Names:
- Fpga trainer kit with downloader
- Cpld trainer kit with downloader
- Verification of logic gates kit
- Verification of booleam algebra theorem
- Verification of operation of flip-flop kit
- Verification of operation of verious counter kit
- Verification of operation of h.a&f.a kit
- Verification of operation of mux &demux
- Trainer kit for decoder & encoder
- Trainer for bcd & comparator kit
- Trainer and parity bit generator kit
- Trainer for shift register
- Trainers for code converters b to g &g to b
- Trainer for ram and rom
- Cmos/ttl basic operational charecteristics
- Combained digital and analog ic tester
- Xilinx ise simulator
IC Applications Lab
This lab is part of III year I semester. The main objective of this lab course is to gain the practical hands on experience by exposing the students to various linear IC applications. The students will have an understanding of the concepts involved in various linear integrated circuits and their various applications.Through this lab the students will get a thorough understanding of various linear ICs and finally this also introduces some TTL ICs for digital circuit applications especially the 741 operational amplifier and its various applications. The lab also introduces to the students 555 timer and its applications, various voltage regulators.
Equipment Names:
- Cathode ray oscilloscope
- Regulated power supply
- Function generators
- Pulse and wave saping trainer kits
- Digital logic trainer kits
- 5kva servo stabilizer
- Multimeters
- Decade capacitance box
- Decade resistance box
- Digital metrers(0-20)v
- DIGITAL METRERS(0-200)ma
Electronic Devices and Circuits Lab
This lab is part of II year I semester. The main aim of the lab is to expose the student with practical awareness for the components like diode, transistor (BJT &FET) & study its characteristics. Through this lab the students will get a through understanding of various applications of electronic components.m
Acknowledge of basic concepts of electricity & units of electricity, network theorems, ohms law & Kirchhoff’s law are required.
Equipment Names:
- CATHODE RAY OSCILLOSCOPE
- MULTIMETERS
- BREAD BOARDS
- 5KVA SERVO STABILIZER
- PHY-413FC ELECTRONIC LAB KITS
- PHY-411SEMI CONDUCTER DEVICES KITS
- FUNCTION GENERATORS
- REGULATED POWER SUPPLY
- DECADE RESISTANCE BOX
- DECADE CAPACITANCE BOX
- DECADE INDUCTANCE BOX
- DIGITAL METRERS(0-20)V
- DIGITAL METRERS(0-200)ma
- DIGITAL METRERS(0-200)µa
Micro Processors and Micro Controllers Lab
This lab is a part of III Year II semester. This lab is well equipped with all the microprocessors and micro controllers. It consists of performing Intel Assembly language on processors of 8086,8085,8051(TRAINER KITS) and also by using interfacing modules like stepper Motor, traffic lights, elevators, 7 segment display etc. Final year students have performed much application for their Project works on micro controllers (8051)
Equipment Names:
- Micro processor trainer kits 8086
- Micro processor trainer kits 8051
- Inter facing cards(elevator)
- Adc interface
- Dac interface
- Traffic lights interface
- Stepper motor interface
- Study cards-8251&8253
- 8279 study cards
- 8255 study card interface
- Caliculator type keyboard Interface
- 6 Digit,7-Segment places with caliculator interface keyboard
- Esa if-lcd
- Musical tone generator interface
- Real time clock interface
- Logic control interface
- 4x4 Matrix level Keyboard Interface
- Elevator inteface
- 4 digital,seven segment led display interface
- Dc motor inyerface
- TXDR Interface Using PT100 with ADC
- 8259 study card interface
- Ups-7.5 kva online(180vdc)
- 12v-28h SMF BATTERIES
- Battery rack
- Computers
Micro Wave and Optical Communications Lab
This lab is part of IV year I semester. The main objective of this lab is to gain the practical hands on experience by exposing the students to various microwave components and optical fibers. The students will have an understanding of the concepts involved in transmission and reception of the microwave signals, characteristics of components.
Acknowledge of analog communications, digital communications, electromagnetic theory, microwave engineering, optical communications is required.
Equipment Names:
- Klystron source microwave test bench
- Optical fiber trainer kit(analog)
- Optical fiber trainer kit(digital)
- Gun source microwave test bench
- Optical fiber trainer kit(analog)
- Optical fiber trainer kit(digital)
- Laser trainer kit
- Cooling fans
